Specialists in assembly plastic and plastomet products, we can offer you a wide product range of standard or special fasteners (plugs, bolts, knobs, caps, nuts, spacers, fasteners, handles, washers, screws).

Products

> Stamped parts

Matter	Thickness	Technical characteristics
EPDM 50	From 1,0 to 40,0 mm	50 ± 5 Sh. A, black, density 1.06; temperature range: - 40 to + 100 °C, tensile strength 9 MPa, tensile elongation 500 %, good resistance to acids, alkalis and the ozone, paint neutral, meets VW 2.8.1. G50 standard and DBL 5556.10 standard (Daimler-Benz delivery rules).
EPDM 60	From 1,0 to 20,0 mm	60 ± 5 Sh. A, black, density 1.30; temperature range: - 40 to + 100 °C, tensile strength 5 MPa, tensile elongation 300 %, resistance to acids and alkalis conditional, also available with 1 or 2 duck layers.
EPDM 402	From 1,0 to 20,0 mm	60 ± 5 Sh. A, black, smooth on both sides, density 1.06; temperature range : - 35 to + 100 °C, tensile strength 18 MPa, tensile elongation 400 %, very good resistance to alkalis and the ozone, low in nitrosamine, approved according to DIN 4807.
EPDM Heat	From 0,5 to 10,0 mm	50 ± 5 Sh. A, black, KTW, density 1.08; temperature range: - 40 to + 150 °C, tensile strength 12 MPa, tensile elongation 350 %, very good resistance to acids, alkalis and the ozone, meets VW 2.8.1. G50 standard and DBL 5571.20 standard (Daimler-Benz delivery rules), sulphur-free.
EPDM 80	From 1,0 to 10,0 mm	80 ± 5 Sh. A, black, density 1.30; smooth on both sides, temperature - 40 to + 100 °C, tensile strength 5,8 MPa, tensile elongation 200 %, good resistance to acids and alkalis, very good weathering resistance.
BUTYL®	From 1,0 to 10,0 mm	60 ± 5 Sh. A, black, density 1.11; temp. range - 40 to + 100 °C, tensile strength 13 MPa, tensile elongation 600 %, good resistance to acids, alkalis and ozone.
NSF	From 3,0 to 4,0 mm	Fine weave. Black, 65 ± 5 Sh. A, density 1.45; temp. range - 30 to + 70 °C, tensile strength 4 MPa, tensile elongation 150 %, smooth bottom, fi ne grooves, resistance to acids and alkalis conditional. Also available with 1 duck layer.
GU 40 GREY	From 0,5 to 20,0 mm	40 ± 5 Sh. A, grey, density 1.03; temp. range - 40 to + 70 °C, short-term peak temperature 80 °C, tensile strength 15 MPa, tensile elongation 500 %, good resistance to acids and alkalis, paint neutral, DVR 22 h / 70 °C / 35 %.
GU 45 WHITE	From 1,0 to 10,0 mm	No duck layer, 45 ± 5 Sh. A, white, density 1.27; temp. range - 30 to + 70 °C, tensile strength 12 MPa, tensile elongation 550 %, food grade, good resistance to alkalis, resistance to acids conditional, BGVV XXI (BGA) Cat. 1 FDA CFR 177.2600.
GU 50	From 1,0 to 40,0 mm	50 ± 5 Sh. A, black, density 1.30; temp. range - 35 to + 70 °C, tensile strength 4 MPa, tensile elongation 300 %, resistance to acids and alkalis conditional, DVR 24 h / 70 °C / 40 zz%.
GU 52 RED	From 1,0 to 10,0 mm	50 ± 5 Sh., density 1.24; temp. range - 30 to + 90 °C, tensile strength 7 MPa, tensile elongation 500 %, food grade, resistance to acids and alkalis conditional.
GU 67 LIGHT	From 1,0 to 20,0 mm	65 ± 5 Sh. A, KTW approved (plastic and rubber for drinking water), density 1.43; temp. range - 30 to + 70 °C, tensile strength 8 MPa, tensile elongation 380 %, food grade, good resistance to alkalis, resistance to acids conditional, BGVV XXI (BGA) Category 4. Also available with 1, 2 or 3 duck layers.
GU 70	From 0,5 to 50,0 mm	70 ± 10 Sh. A, black, density 1.45; temp. range - 30 to + 70 °C, tensile strength 4 MPa, tensile elongation 150 %, resistance to acids and alkalis conditional. Also available with 1 or 2 duck layers.
GU 90	From 1,0 to 6,0 mm	85 ± 5 Sh. A, black, density 1.40; temp. range - 30 to + 70 °C, tensile strength 5 MPa, tensile elongation 100 %, DVR (compression set) 24 h / 70 °C / 25 % resistance to acids and alkalis conditional.
GU GAS	From 1,0 to 10,0 mm	80 ± 5 Sh. A, black, density 1.35; temp. range - 15 to + 80 °C, short-term peak temperature 110 °C, tensile strength 13 MPa, tensile elongation 250 %, DVR (compression set) 168 h / 100 °C / 35 %, good resistance to acids, alkalis, fuel and oil, ozone resistance conditional, DVGW approved according to standards DIN 3535 1 and 2 and DIN EN 549.
GU GMSB	From 1,0 to 10,0 mm	(GU grade for membranes and shot blasting) 60 ± 5 Sh. A, black, density 1.15; temp. range - 30 to + 70 °C, short-term peak temperature 90 °C, tensile strength 15 MPa, tensile elongation 400 %, good resistance to alkalis, DVR (compression set) 22 h / 70 °C / 30 %, volume resistivity < 10⁶ ohm.cm, resistance to ozone and acids conditional.
HYPALON	From 1,0 to 10,0 mm	70 ± 5 Sh. A, black, smooth on both sides, density 1.47; temp. range - 30 to + 120 °C, tensile strength 8 MPa, tensile elongation 180 %, very good resistance to alkalis and acids, good oil and ozone resistance.
NEO 50	From 1,0 to 20,0 mm	50 ± 5 Sh. A, black, density 1.20; temp. range - 20 to + 70 °C, tensile strength 6 MPa, tensile elongation 350 %, resistance to acids and alkalis conditional.
NEO 63	From 0,5 to 10,0 mm	65 ± 5 Sh. A, black, no duck layer, density 1.40; temp. range - 30 to + 70 °C, tensile strength 6 MPa, tensile elongation 200 %, resistance to oil, alkalis and acids conditional, good ozone resistance. DVR (compression set) 22 h / 70 °C / 40 %. Also available with 1 or 2 duck layers.
NEO 60 LIGHT	From 1,0 to 10,0 mm	60 ± 5 Sh. A, light, density 1.46; temp. range - 20 to + 90 °C, tensile strength 6 MPa, tensile elongation 550 %, resistance to acids, alkalis and oil conditional, physiologically inert.
NEO 80	From 1,0 to 15,0 mm	80 ± 5 Sh. A, black, density 1.50; temp. range - 20 to + 70 °C, tensile strength 5 MPa, tensile elongation 200 %, resistance to ozone, oil, alkalis and acids conditional.
PERB 45	From 1,0 to 20,0 mm	50 ± 5 Sh. A, black, density 1.30; temp. range - 10 to +70 °C, short-term peak temperature 80 °C, tensile strength 4 MPa, tensile elongation 350 %, DVR (compression set) 22 h / 70 °C / 40 %, resistance to acids and alkalis conditional, good oil resistance.
PERB 65	From 0,5 to 40,0 mm	65 ± 5 Sh. A, black, density 1.35; temp. range - 20 to + 70 °C, tensile strength 5 MPa, tensile elongation 200 %, DVR (compression set) 22 h / 70 °C / 40 %, good oil resistance, resistance to fuel, acids and alkalis conditional. Also available with 1 or 2 duck layers.
PERB 60 LIGHT	From 1,0 to 10,0 mm	60 ± 5 Sh. A, light, density 1.32; temp. range - 30 to + 80 °C, tensile strength 11 MPa, tensile elongation 500 %, oil resistance conditional, food grade, good resistance to acids and alkalis, KTW approved (plastic and rubber for drinking water), BGVV XXI (BGA) cat. 2.
PERB SUPER	From 0,8 to 10,0 mm	65 ± 5 Sh. A, black, density 1.37; temp. range - 20 to + 120 °C, tensile strength 7 MPa, tensile elongation 320 %, resistance to acids, alkalis and ozone conditional, very good resistance to oil and fuel.
PERB 80	From 1,0 to 15,0 mm	80 ± 5 Sh. A, black, density 1.50; temp. range - 20 to + 70 °C, tensile strength 5 MPa, tensile elongation 200 %, resistance to ozone, oil, alkalis and acids conditional.
SOFT PVC 70	From 0,1 to 10,0 mm	67 ± 5 Sh. A, natural, density 1.34; temp. range - 35 to + 50 °C, tensile elongation 260 %, resistance to acids conditional, good resistance to alkalis and oil, volume resistivity 10¹⁵ ohm x cm.
SOFT PVC 80	From 0,3 to 10,0 mm	80 ± 5 Sh. A, light and transparent, density 1.23; temp. range - 30 to + 80 °C, resistance to acids and alkalis conditional, UV-resistant.
SI 40 TR/RL	From 0,5 to 10,0 mm	40 ± 5 Sh. A, transparent, density 1.12; temp. range - 60 to + 230 °C, tensile strength 4 MPa, tensile elongation 300 %, good resistance to acids, alkalis and ozone, oil resistance conditional, food grade, BGA XV- Silicone, FDA # 177.2600. 6 - 8 cm = 50 ± 5 Sh. A.
SI 60 TR/RL	From 0,5 to 10,0 mm	60 ± 5 Sh. A, transparent, density 1.14; temp. range - 60 to + 230 °C, tensile strength 5 MPa, tensile elongation 250 %, food grade, good resistance to acids, alkalis and ozone, resistance to oil and fuel conditional, BGA XV- Silicone, FDA # 177.2600.
SI 60 RED	From 0,5 to 10,0 mm	60 ± 5 Sh. A, red, density 1.17; temp. range - 60 to + 230 °C, tensile strength 5 MPa, tensile elongation 250 %, good resistance to acids, alkalis and ozone, resistance to oil and fuel conditional, food grade, BGA XV- Silicone, FDA # 117.2600.
VITON® TRIMMINGS	From 0,5 to 12,0 mm	75 ± 5 Sh. A, black, density 2.0; temp. range - 10 to + 275 °C, tensile strength 9 MPa, tensile elongation 200 %, DVR (compression set) 22 h / 200 °C / 45 %, good resistance to acids, alkalis, fuel, oil and ozone, sulphur-free, self-extinguishing, biphenol, electric insulation.
VITON®	From 1,0 to 6,0 mm	70 ± 5 Sh. A, black, density 1.92; temp. range - 20 to + 200 °C, tensile strength 6 MPa, tensile elongation 340 %, very good resistance to acids, oil and fuel, good resistance to alkalis, ozone and ageing resistant, pure FKM blend, high chemical resistance, good mechanical properties.
POLYURETHAN (PU)	From 0,5 to 50,0 mm	72 / 80 / 90 ± 5 Sh. A, brown, density 1.24-1.25; temp. range - 10 to + 60 °C, tensile strength 44 - 48 MPa, tensile elongation 550 - 600 %, resistance to acids and alkalis conditional, very good resistance to oil and fuel, very low abrasion.
VULKOLLAN®	From 0,5 to 50,0 mm	70 / 82 / 90 ± 5 Sh. A, natural, density 1.24 - 1.26; temp. range - 25 to + 80 °C, tensile strength 40 - 46 MPa, tensile elongation 620 - 660 %, good resistance to oil, fuel and ozone, resistance to acids and alkalis conditional.
CELLULAR VULKOLLAN®	From 1,0 to 60,0 mm	Density 350 + 450 kg / m³, temp. range. - 20 to + 80 °C, good oil resistance, resistance to fuel conditional, weather resistant; RG 35 + RG 45.
FRN	From 2,0 to 40,0 mm	Foam rubber natural; density 350 - 750 kg / m³, dark grey, cellular blend; temp. range - 40 to + 70 °C, tensile elongation 250 - 400 %, resistance to oil, fuel, acids, alkalis and ozone conditional, motif on both sides.
NFR	From 2,0 to 30,0 mm	Neoprene foam rubber, motif on both sides, density 700 - 1000 kg / m³, cellularblend, temp. range. - 40 to + 110 °C, resistance to acids, alkalis and oil conditional, self-extinguishing.
CER	From 2,0 to 60,0 mm	Cellular epoxy rubber black, 45 ± 10 Sh., density 175 kg / m³; temp. range - 50 to + 95°C, peak temperature +100°C, resistance to alkalis, acids and oil conditional, very good ozone resistance, closed pores, FMVSS 302, SAE J 18- 79, ASTM D 1056-77, AFNOR, NF - R 99-211-80, DBL 5574.10.
CRCR	From 2,0 to 50,0 mm	CR cellular rubber 45 ± 10 Sh., black, density 175 kg / m³, temp. range. - 40 to + 80 °C, resistance to alkalis, acids, oil, fuel and ozone conditional, closed pores, FMVSS 302, SAE J 18-79, ASTM D 1056-77, AFNOR NF - R 99-211- 80, DIN 7726.
ABIL	From 0,25 to 1,5 mm	Dark grey, density 1.0; temperature + 120 °C, peak temperature + 150 °C, max. pressure 10 bar, compressibility 22.5 %, tensile strength > 15 N / mm², very good resistance to oil and fuel, good resistance to acids and alkalis.
KLINGERSIL 4400	From 0,3 to 5,0 mm	Green, printed, density 1.6O; max. temp. + 400 °C, max. pressure 60 bar, good resistance to oil, alkalis, fuel and acids, HTB (gas and heating test bed), KTW (plastic and rubber for drinking water), WRC (water research centre), BAM, DVGW.
NOBEST	From 1,5 to 10,0 mm	Light, density 0.90; temperature + 1200 °C, tensile strength 3 MPa, good resistance to oil, fuel, acids and alkalis, loss on ignition 20 % max., other grade available on request.
HOSTAFORM C ( Delrin ) ( POM )	From 0,5 to 6,0 mm	Natural, density 1.41; temp. range - 40 to + 100°C, dielectric strength 50 kV / mm, special volume resistivity 10¹⁵ ohm.cm, tensile elongation > 20 %, Charpy impact test > 10 kJ / m², very good resistance to oil, fuel, acids and alkalis, UL 94 HB fi re classifi cation, hard, WRC (water research centre).
FASERFLEX	From 0,2 to 3,0 mm	Brown, density 0.80; temperature + 120 °C, very good resistance to oil and fuel.
GU - KORK PR 82	From 1,0 to 6,0 mm	Red - brown PU, density 0.77; temperature + 110 °C, good resistance to oil, fuel, acids, alkalis, ozone and weather conditions.
HOSTAPHAN RN	From 0,01 to 0,35 mm	Transparent, density 1.40; temp. range - 19O to + 130 °C, tensile strength 200 MPa, good resistance to oil, fuel, acids and alkalis. Modulus of elasticity 4500 N / mm², tensile elongation 100 %, melting point 260 °C
POLYAMIDE 6 ( Nylon )	From 0,2 to 6 mm	Natural, density 1.14; temp. range - 30 to + 100 °C, very good resistance to oil and fuel, good resistance to alkalis, resistance to acids conditional, hard, resists friction, good vibration damping properties, UL 94 - V2 fi re classifi cation, volume resistivity 1015 ohm.cm.
LD - PE	From 0,1 to 6 mm	Natural, density 0.92; temp. range - 40 to + 60 °C, very good resistance to acids and alkalis, good resistance to oil and fuel, dielectric strength 75 Kv / mm, volume resistivity 10¹⁷ ohm.cm, tensile strength at yield point 9 N / mm², thermal conductibility 0.40 W / mxK, combustibility as per standard DIN 4102 B2.
HD - PE	From 0,5 to 6 mm	Natural, density 0.95; temp. range - 40 to + 80°C, volume resistivity 10¹⁶ ohm.cm, combustibility as per standard DIN 4102 B2, tensile strength at yield point 22 N / mm², very good resistance to acids and alkalis, good resistance to oil and fuel, KTW (plastic and rubber for drinking water). Also available in black.
PTFE ( Teflon )	From 0,05 to 40,0 mm	White, pure, density 2.18; temp. range - 200 to + 260 °C, volume resistivity 10¹⁸ ohm.cm, very good resistance to acids, alkalis, fuel and oil, nonfl ammable, UL 94 VO fi re classifi cation. Also available coated on one side or with glass fibre, charcoal or graphite.
HARD PVC	From 0,2 to 5,0 mm	White, density 1.45; temp. range - 15 to + 60 °C, volume resistivity 10³ ohm.cm, good resistance to acids, oil, fuel and alkalis, low fl ammability, according to DIN 4102 B1, self-extinguishing. Light transparent, light grey or black and red also available.
POLYSTYROL	From 0,3 to 6,0 mm	White, black, density 1.05; max. temp. + 70 °C, good resistance to acids and alkalis, oil resistance conditional, volume resistivity 10¹⁶ ohm.cm, excellent resistance to cold temperatures, good mechanical properties.
KLINGERSIL C 4409	From 0,8 to 3,0 mm	Light green, density 2.0; max. temp. + 400 °C, max. pressure 80 bar, good oil resistance.
AFM 30	From 0,25 to 3,0 mm	Green, density 1.95; max. temp. + 250 °C, max. pressure 100 bar, good resistance to oil, fuel, acids and alkalis, DVGW approved (German gas and water specialists association), BAM, HTB (gas and heating test bed) tested.
CENTELLEN WS 3820	From 0,3 to 4,0 mm	Green, density 1.80; temp. range - 200 to + 200 °C, max. pressure 100 bar, good oil resistance, resistance to acids and alkalis conditional, DVGW approved (German gas and water specialists association), BAM, KTW (plastic and rubber for drinking water), HTB (gas and heating test bed), WRC (water research centre).
CENTELLEN 200	From 0,5 to 5 mm	Red, density 1.80; temp. range - 200 to + 180 °C, max. pressure 40 bar, good oil resistance, resistance to acids and alkalis conditional, KTW approved (plastic and rubber for drinking water).
HD 300	From 0,5 to 5 mm	Green, density 1.90; max. temp. + 220 °C, max. pressure 80 bar, good resistance to oil and fuel, resistance to alkalis and acids conditional, KTW (plastic and rubber for drinking water), DVGW (German water and gas specialists association).
UNI-BLUE ASBESTOS FREE	From 0,3 to 5 mm	Blue, density 1.80; temperature + 250 °C, pressure 100 bar, good resistance to oil and fuel, resistance to acids and alkalis conditional, KTW (plastic and rubber for drinking water), DVGW (German water and gas specialists association), WRC (water research centre). Also available with graphite on both sides.
FIBRE	From 0,3 to 3 mm	Red, hard, density 1.35; temperature + 95 °C, very good resistance to oil and fuel, resistance to alkalis and acids conditional, KTW (plastic and rubber for drinking water). Also available in grey or black.